Shortened Representation (2-D)

2-D Part > CAids > Bore > Shorten, in x-direction

2-D Part > CAids > Bore > Shorten, in y-direction

Use these functions to create shortened representation of shafts or other components in x- or y-direction.

1. Identify the part.
2. Specify the correction area for dimensioning in the rectangle.

The dimensioning and the area to be shortened must lie completely within the rectangle.

3. Then use a rectangle with point option O to specify the area to be cut out.

(1) Identified part
(2) Correction area for dimensioning
(3) Shortening

Please note:

• To temporarily display the shortening in the ICN, right-click the drawing name in the ICN and select the Auxiliary Parts On/Off function from the displayed context menu.
• The shortening will not be considered in subsequently added 2-D dimensions, as they do not "know" that the shortening has taken place. To obtain dimensions which are adjusted to the shortening, we recommend using the dimensioning setting Dimension figure with allowance.

Construction Aids (2-D)