Countersink (2-D)

2-D Part > CAids > Bore > Countersink

You use this function to draw countersinks on existing bores.

1. Specify the countersink depth and the countersink angle.
2. Identify the two longitudinal edges of the bore near the countersink.

You can insert the countersink repeatedly into the active part.

Use the right mouse button to access the function selection again and end the insert operation.

(1) Countersink depth
(2) Countersink angle
(3) Longitudinal edge of the bore

To display the countersink temporarily in the ICN, right-click the drawing name in the ICN and select the Auxiliary Parts On/Off function from the displayed context menu.

Construction Aids (2-D)