Inserting Symbols (2-D)

2-D Part > Standard Parts > Weld > Hydraulics /Pneumatics 

2-D Part > Standard Parts > Weld > Electrical Engineering 

2-D Part > Standard Parts > Weld > Plant Engineering 

Depending on the function you chose, the system opens a window containing

• Hydraulics/Pneumatics Symbols,
• Electrical Engineering Symbols or
• Plant Engineering Symbols.

1. Choose the symbol you require.
2. Identify a reference point for the symbol.
3. Use the point option to insert the symbol into the drawing.

You can now insert the same symbol again or press ESC to switch to the selection. To end the function, press ESC again.

Standard Parts (2-D)