Transfer single parts to database (PDM in HiCAD)

Context menu (RMB) > Reference part, Save, Detail drawing

This function enables you to transfer single parts from an active drawing to the database.

 

  1. Activate the part to be referenced and choose the Reference part, Save, Detail drawing function.
  2. The dialogue window for part referencing is displayed. Activate the External referencing option.
  3. Activate the Also reference identical parts checkbox if you also want parts that are identical with the active part to be referenced. HiCAD then searches for parts that match the part to be referenced in terms of name and geometry.

HiCAD will then search for parts that meet the following criteria:

  1. In the Part or Detail drawing section, activate the required radio button to define whether you want the part to be saved as a Part (KRA file) or as a Detail drawing.
  2. In the Storage location, DB links section, define how you want the database entry to be made. The options are only available if you are using the HELiOS PDM system. You can then save the part with or without database entry.
  3. In the DB document master for part section, you can display or re-generate the document master.
  4. After selecting all required options, click Continue.
  5. The subsequent dialogue and the required entries depend on the options you have chosen. The save location is evaluated first, followed by the option selected under Part or Detail Drawing.

 

Options:

Without save

Select this option for internal referencing.

Save as part with catalogue entry

An externally referenced part can only be saved as a part or a variant if it has previously been saved as a referenced part (External referencing, Save as part).

Then, call the Reference part, Save, Detail drawing function for this part again and select the option Save as part/variant with catalogue entry.

Save as variant with catalogue entry

Create + save detail drawing

Use this function to save the part as detail drawing with the file extension .SZA. In contrast to the previous option you are enabled to specify additional settings here, such as number and type of the saved views, the required coordinate system etc. If the relevant part is the 3-D main part of the drawing, you will be prompted to specify before drawing generation whether the drawing is to be created in sheet area 1 of the active drawing.

Detail drawing, with options

Here, the part will be saved as a detail drawing with the file extension .SZA. In contrast to the previous option, you can specify additional settings here , such as the number and the type of the saves views, the coordinate system etc. If the relevant part is the 3-D main part of the drawing, you will be prompted to specify before drawing generation whether the drawing is to be created in sheet area 1 of the active drawing.

 

In the Storage location, DB link field you can further specify the storage in the database: As document and/or article, with or without master data.

Database, without article master

The part is not BOM-relevant, therefore no article master will be required. The part will be saved as a document.

Database, with new article master

A new article master and a document master will be created and linked to each other automatically during saving.

Database, assign article master

An existing article master will be assigned via the article search function and a new document master will be created. Article master and document master will be linked to each other.

Database, apply article master from part

The part already has a article master. The article master will be taken over and a new document master will be created. Article master and document master will be linked to each other. This option is only available if an article master has already been created for the part.

Without database

The referencing will not be saved to the HELiOS database.

 

For the document master you can choose between the following two options in the DB Document master for part field:

The document data input mask will be displayed.

The document master will automatically be generated by HiCAD.

 

Please note:

 

Extensive information about referencing can be found here.

Create, Save, Load DrawingReferencing (3-D)

© Copyright 1994-2018, ISD Software und Systeme GmbH
Version 2302 - HELiOS + HiCAD
Date: 14/09/2018

> Feedback on this topic