The attribute values for various masks of the HELiOS functions in HiCAD are preset in the following files:
During a part-oriented working you assign to parts and drawings an article master. In the process, you typically load drawings with links.In contrast, if you work exclusively in a document-oriented way, you can deactivate the suggested links permanently. To do this, open the Configuration Editor (ISDConfigEditor.exe) and select ... > System settings > HELiOS and set the parameter Use HELiOS/HiCAD Default Solution to 0. The default setting is 1.
|
Definition of default values (init values) when creating a new document master. New drawing document master: Value of attribute (needs to be contained in pre-defined attributes list!) |
DOCUMENT_TYPE |
|
HiCAD Drawing |
|
|
New drawing document master: Value of attribute |
BENENNUNG |
|
New part document master: Value of attribute |
HEL_BLATT T |
|
New part document master: Value of attribute (needs to be contained in pre-defined attributes list!) |
DOCUMENT_TYPE |
|
HiCAD Part/Variant |
|
|
New part document master: Value of attribute |
BENENNUNG |
|
Part document |
|
|
Save part: Value of drawing document attribute |
BENENNUNG |
|
Assembly drawing (=Production drawing) |
|
|
Apply part attributes to document master when creating new document? 1=Yes, 0=No |
1 |
If the parameter Apply part attributes to document master when creating new document? 1=Yes, 0=No has been set to 1, the following HiCAD part attributes will be applied as HELiOS document master data during saving:
| Meaning | HiCAD part attribute | HELiOS document attribute |
|---|---|---|
|
Article number |
$BB |
HEL_SACHNUMMER |
|
Designation1 |
$01 |
BENENNUNG |
|
Comment |
$03 |
BEMERKUNG |
The mapping of the attributes is carried out by the macro 2d3dteil_heliostsdefinieren2.mac. For a customization please contact the ISD Consulting.
Definition of default values (init values) when creating a new article master
|
New drawing part master: Value of attribute for part type for assembly (needs to be contained in pre-defined attributes list!) |
COMPONENT_TYPE |
|
Assembly |
|
|
New drawing part master: Value for attribute for individual part (needs to be included in pre-defined attributes list!) |
COMPONENT_TYPE |
|
Part |
|
|
Apply part attributes to part master when creating new part master? 1=Yes, 0=No |
1 |
If the parameter Apply part attributes to part master when creating new part master? 1=Yes, 0=No has been set to 1, HiCAD part attributes will be applied as HELiOS article attributes as follows during the creation of new article masters:
| Meaning | HiCAD part attribute | HELiOS Article attribute |
|---|---|---|
|
Article number |
$BB |
HEL_SACHNUMMER |
|
Designation 1 |
$01 |
BENENNUNG |
|
Designation 2 |
$02 |
BENENNUNG2 |
|
Comment |
$03 |
BEMERKUNG |
|
Part type |
$05 |
TEILEART |
|
Dimensions |
§09 |
ABMESSUNGEN |
|
Length |
§03 |
LAENGE |
|
Width |
§02 |
BREITE |
|
Height |
§04 |
HOEHE |
|
Weight |
§01 |
GEWICHT |
|
Avoirdupois weight |
§18 |
HANDELSGEWICHT |
|
Surface area |
§10 |
FLAECHE |
|
Beam cut type |
$06 |
PROFIL_SCHNITTTYP |
|
Beam cutting angle1 |
§14 |
PROFIL_SCHNITW1 |
|
Beam cutting angle2 |
§15 |
PROFIL_SCHNITW2 |
|
Beam cutting angle1 XZ |
§05 |
PROFIL_SCHNITW1XZ |
|
Beam cutting angle1 YZ |
§06 |
PROFIL_SCHNITW1YZ |
|
Beam cutting angle2 XZ |
§07 |
PROFIL_SCHNITW2XZ |
|
Beam cutting angle2 YZ |
§08 |
PROFIL_SCHNITW2YZ |
|
DIN weight/m |
§16 |
GEWICHT_M |
|
Avoirdupois weight/m |
§19 |
HANDELSGEWICHT_M |
|
Surface/m |
§17 |
FLAECHE_M |
|
Moment IY |
IY |
MOMENT_IY |
|
Moment WY |
WY |
MOMENT_WY |
|
Moment IZ |
IZ |
MOMENT_IZ |
|
Moment WZ |
WZ |
MOMENT_WZ |
|
A-web |
ASTEG |
PROFIL_ASTEG |
The mapping of the attributes is carried out by the macro 2d3dteil_heliostsdefinieren2.mac. For a customization please contact the ISD Consulting.
Configuration of HELiOS Functions in HiCAD
|
© Copyright 1994-2018, ISD Software und Systeme GmbH |