Automatic 3-D Main Part and Link Check in HELiOS Functions (PDM in HiCAD)

HELiOS PDM > Others > New Article... > AutoCheck on/off

After selecting the AutoCheck on/off function, you can specify whether you want HiCAD to perform automatic link checks during operation, and if so, specify the settings for such checks.The following options are available:

• Automatic check, with warning: A warning will be issued if any missing links are found.
• Automatic check + correction, with query: If any missing links are found, HiCAD asks you whether this should be corrected.
• Automatic check + correction, without query: Missing links will be corrected automatically.
• Do not check: No automatic checks will be performed.

If the Check link of main part/main assy. to drawing checkbox has been activated, the main part or the main assembly, respectively, will also be checked. If the checkbox is deactivated, the main part/main assembly will be excluded from the check.

You can perform these checks manually for the active part in HiCAD by means of the Check HELiOS links, active part + drawing function.

Configuration of HELiOS Functions in HiCAD