Apply Title Block Changes

If you also want to use title block changes for other drawing frames, proceed as follows:

1. Create a new drawing on a 1:1 scale.
2. Load the drawing frame you want. To do this, right-click the drawing area and, in the context menu, select Insert > Insert drawing frame . Delete the old title block SCHRIFE.
3. In the drawing, right-click the drawing frame and, in the context menu, choose Insert > Insert part, via Explorer .
4. Select the file SCHRIFE.FIG and place the title block in the bottom right corner of the drawing frame while inserting or after inserting.
5. In the ICN, switch the display of the auxiliary parts on. To do this, right-click the name of the drawing and select the appropriate function.
6. In the ICN, drag the title block figure under the drawing frame entry in order to assign the figure to the frame as its sub-part.
7. In the drawing, right-click the drawing frame and select Save part > Save, as 2-D part. Do not rename the part, and confirm that the existing part should be overwritten.

Do the same for other drawing frames.