The beam length is changed by a defined value.
Change beam length, via new total length
The beam is lengthened or shortened by specifying the new total length.
The beam is lengthened or shortened to an arbitrary 3-D point in the drawing.
The beam is divided by specifying the distance between the division point and the beam end.
Clicking 
opens a pull-down menu with further Divide functions:
|
Divide beam once, with clearance Divides a beam into 2 segments, with clearance or overlap if required. |
|
Divide beam several times, flush Divides a beam into several segments of equal length. The division is made flush, i.e. without gaps between the segments. |
|
Divide beam several times, with clearance Divides a beam into several segments of equal length. The division is made with clearance, i.e. with gaps of a defined width between the segments. |
Divided beams are unioned again.
