Sealing (3-D ME)

Metal Engineering > Metal Eng. 3-D Section > Sealing

To be able to insert sealings, you need to be in an active sectional view. Click the Sealing icon in the Metal Eng. 3-D Section function group of the Ribbon. A dialogue window with the following fitting options will be displayed:

Type: Select between Provided on site(mortar, concrete) or In-house production.
Permeability: Select between Steam-tight and Steam-permeable .
Comment: Empty input field for comments on the sealing.
Material: Select between Silicon or Acrylic.

Below the selection fields you can specify via the corresponding checkboxes whether you want the sealings to be With sealing cord or BOM-relevant.

At the bottom of the dialogue you can open a pane with extended setting options.

Confirm with OK. Select a first edge, then a second edge in your drawing. The edges do not need to run parallel.