Various standard parts and standard processings, e.g. fasteners or threads, allow you to fit the selected standard part repeatedly. In other words, the function is not ended once the standard part has been fitted, but the standard part is fitted again by specifying the next fitting position using the same settings (processing plane, fitting direction).
Alternatively, you can use the right mouse button to activate a context menu before specifying the fitting position. The functions of this menu enable you to change the fitting direction or the reference point of the standard part.
Selects a new standard part or a new standard processing.
If you have changed the reference point of a standard part, the standard part is positioned so that the new reference point lies in the original fitting position (only active when processing standard parts, not during fitting).
Changes the reference point, i.e. the point that is used to position the standard part.
Rotates the standard part by 90 or 180 degrees.
Changes the fitting direction by selecting another processing plane.
Mirrors the standard part on the fitting plane
Cancels the function.
Related Topics
Version 1702 - HiCAD 3-D | Date: 9/2012 | © Copyright 2012, ISD Software und Systeme GmbH