Align Dimension Line (2-D)

2-D Dimensioning + Text > Process > Dim.line > Align, line

2-D Dimensioning + Text > Process > Dim.line > Align, 2 points

These functions enable you to align the position of the dimension line according to an existing reference line or according to two points to be identified.

1. First choose an identification type for the dimension line.
2. Identify the reference line and then use the dimension figure to identify the dimension line.

Depending on the function you have selected, specify a reference line or 2 points.

The function is designed so that the dimension line is not placed on the same level as the reference line. You set the difference in level in BEMPAR.DAT (spacing of dimension lines). You can, of course, also set it to 0.

 Related Topics

Process Dimensioning (2-D)