Change Dimensioning Parameters (2-D)

Change Parameters

2-D Dimensioning + Text > Process > Settings > Change 

This function enables you to change the parameters of existing dimensionings.

1. First select the dimensioning identification type.

The following options are available:

• Individual
• Structure
• In rectangle
• Within contour
• Active part
• All (entire drawing).

2. Then change the parameters in the input window.
3. Then press OK to exit the window.

The Change all parameters? prompt appears. If you answer YES, all input window settings are applied; if you answer NO, only those parameters that have changed are applied.

4. Specify the procedure for changing parameters.
5. Now identify the dimensionings from the dimension figure.

Parameters, Same as reference dimension

2-D Dimensioning + Text > Process > Settings >Same as reference dimension

You use this function to apply the parameters of an existing dimensioning.

1. First select the identification type of the dimensioning.

The following options are available:

• Individual
• Structure
• In rectangle
• Within contour
• Active part
• All (entire drawing)

2. Now identify the reference dimensioning.
3. Identify the dimensioning

 Related Topics

Process Dimensioning